Kyocera FS-1800 - Installing the Waste Toner Bottle

2-8
FS-1800/1800N | FS-3800/3800N
2-2-2 Installing the waste toner bottle
The waste toner bottle must be installed in the printer. It must be properly fitted inside the left side
cover as explained below.
1. Open the cap 1 of the waste toner bottle 2.
2. Open the side cover 3 and install the waste toner bottle 2 so that it is properly seated in the
area under the drum unit.
3. Close the side cover 3.
Figure 2-2-5 Installing the waste toner bottle
3
2
2
1
3