Kyocera FS-1800 - DIMM Specifications; Expanding the Memory (DIMM); Minimum Memory Requirements

FS-1800/1800N | FS-3800/3800N
2-11
2-2-4 Expanding the memory (DIMM)
The FS-1800/1800N comes standard-equipped with 8 MB of main memory; the FS-3800/3800N
comes with 16 MB of memory. The FS-1800/1800N can be expanded up to the maximum of 264
MB (8 MB + 256 MB), and the FS-3800/3800N can be expanded up to the maximum of 272 MB
(16 MB + 256 MB). For all models, expansion should be done using optional DIMMs (Dual In-
line Memory Module).
(1) Minimum memory requirements
Resolution
Printing environment 300 dpi 600 dpi 1200 dpi
Fast mode Fine mode
PCL6, duplex mode = None 8 MB 8 MB 8 MB 8 MB
PCL6, duplex mode = On 8 MB 8 MB 8 MB 12 MB
KPDL, duplex mode = None 8 MB 8 MB 8 MB 8 MB
KPDL, duplex mode = On 8 MB 8 MB 12 MB 12 MB
PCL6/KPDL resource protection, - 10 MB 10 MB 10 MB
duplex mode = None
PCL6/KPDL resource protection, - 14 MB 14 MB 14 MB
duplex mode = ON
(2) DIMM specifications
Item Specification
Memory size in MB 16, 32, 64, 128 MB
Number of pins 100 pins
Access speed 66 MHz
Parity None
Bus width 32 bits