Kyocera FS-1800 - Grid

3-10
FS-1800/1800N | FS-3800/3800N
Grid
1. Take the grid cleaner 1 from protective bag 2 in the new toner kit and remove the cap 3.
NOTE The grid cleaner pad is impregnated with water. Perform the following
cleaning procedure before the pad dries.
Figure 3-1-6 Grid cleaner
2. Attach the grid cleaner 1 to the drum unit 3 with the pad uppermost as shown in the diagram.
Figure 3-1-7 Attaching the grid cleaner
1
3
2
1
3