2F8/2F9/2GA-1
1-5-21
9. Remove the two screws (nuts) and then
remove the terminal and cord plate.
10. Remove the thermal cutout
11. Check or replace the fuser thermistor M and
S, thermal cutout and refit all the removed
parts.
Figure 1-5-27
Cord plate
Cord plate
Terminal
Nut
Nut
30/31 ppm printer
(EUR/USA model)
35/37 and 45/47 ppm printer
(EUR/USA model)
Nut
Nut
Screw
Screw
Screw
Screw
Thermal
cutout
Terminal
Thermal
cutout
To Next Page
Loading...
