Kyocera FS-2000D - Page 96

2F8/2F9/2GA
1-5-24
18. Remove the seven connectors (A).
19. Remove the left wire guide.
20. Remove the three screws and then remove
the engine PWB assembly.
21. Remove the two connectors (B) from the
engine PWB.
Figure 1-5-32
Left wire guide
Connector (A)
Connector (B)
Connector (B)
Connector (A)
Connector (A)
Connector (A)
Screw
Screw
Screw
Engine PWB assembly
Engine PWB assembly