2F8/2F9/2GA-2
1-5-27
7. Remove the screw and then open the inner
cover.
8. Remove the connector (35/37 and 45/47
ppm printer [EUR/USA model] only).
Figure 1-5-36
9. Remove the five screws and then remove
the main PWB from the controller box.
10. Check or replace the main PWB and refit all
the removed parts.
Figure 1-5-37
Inner cover
Screw
Connector
Screw
Screw
Screw
Screw
Screw
Main PWB
Controller box
To Next Page
Loading...
