Kyocera FS-3040MFP+ - Detaching and Refitting the Scanner Unit

2MF/2MG
1-5-13
(2) Detaching and refitting the scanner unit
Procedure
1. Remove the right cover and left cover.
(See page 1-5-3)
2. Remove the document processor.
(See page 1-5-11)
3. Remove the FFC and two connectors
from the main PWB.
Figure 1-5-18
YC1004
YC7
YC8
Main PWB
Main PWB
FFC
Connector
Connector