13
Optional: Changing the Printer Name
IP Printer Name: Changing the printer name only applies to the IPX protocol. With IP
peer to peer printing the printer is identified by its IP address.
IPX Printer Name: The IPX peer to peer printing software uses the NetWare Print
Server Name to identify the 2000E. The default name is the serial number preceded by
KYO, e.g., KYO-163495. If desired, this name can be changed to a more easily
identifiable name with the Management Access Program (MAP).
To change the name with MAP, follow the MAP Configuration instructions in the NetWare
4.x Directory Services Configuration section in this guide (the settings other than NetWare
Print Server Name do not need to be entered). MAP requires the IPX protocol.
Peer to Peer Printing Software Installation
The peer to peer printing software should be installed on each Windows PC that will use
peer to peer printing services.
1. Install and Run the Peer to Peer Software.
➪ Insert the CD included with the EcoLAN 2000E.
➪ Click on the Windows Start button and select Run.
➪ For IPX peer to peer printing, type: D:\IPX-P2P\SETUP.EXE and click
OK. Follow the instructions on the screen to complete installation.
➪ For IP peer to peer printing, type: D:\IP-P2P\SETUP.EXE and click OK.
Follow the instructions on the screen to complete installation.
2. Select the Printer Port.
If the printer driver has not already been installed, please install it from the CD which is
shipped with the printer before continuing with the following instructions.
➪ Click on the Windows Start button and select Settings, then Printers.
➪ Right click on the appropriate printer driver and select Properties from the menu.
➪ Select the Details tab and click on the down arrow beside the Print to the
following port: field to display the list of available ports. (On NT 4.0 select the
Ports tab and scroll down the list of ports).
➪ Select the 2000E from the list of ports and click on OK. With IP peer to peer
printing, the 2000E is displayed by its IP address. With IPX peer to peer printing,
the 2000E is displayed by its NetWare Print Server Name, e.g., the default name
is in the format KYO-163495.
➪ Peer to peer printing configuration is complete. Print jobs will now be directed to
the selected 2000E when the current printer driver is used.
To Next Page
Loading...
