6. Confirm Successful Configuration.
➪ Turn the printer off and on and wait for a powerup network status page to print. If
the network is large, the powerup status page may take several minutes to print.
(Note: This time may be reduced by setting a Preferred File Server for the 2000E
with the Management Access Program. Refer to the NetWare section of the
2000E User’s Manual for more information.)
➪ The Novell Connection Information in the bottom half of the status page displays the
printer name, file server, queue, etc. If it displays Attached: Yes, this confirms that
the 2000E Print Server is ready to accept print jobs.
➪ If the status page does not display Attached: Yes, please verify that the Novell
Print Server Name on the status page under Novell Network Information matches
exactly with the Print Server name that was entered in PCONSOLE or refer to the
troubleshooting section in the User’s Manual.
7
To Next Page
Loading...
