Kyocera FS-6020 - Conveying Section

FS-6020
2-1-4
(3) Conveying section
The conveying section consists of the parts shown in the following illustration and conveys papers from the cassette or
the MP tray to the transfer/separation section when papers are fed, or while refeeding when the optional duplexer is
operated. Paper by feeding or refeeding is conveyed by the middle feed roller to the position where the registration
sensor is turned on, and then sent to the transfer/separation section by the upper registration roller and lower registration
roller.
3
7
4
2
1
5
6
Figure 2-1-5 Conveying section
Registration
sensor
Registration clutch
Middle
feed
clutch
Main PWB
REGDRN
MIDDRN
Engine/high voltage PWB
YC13-2
YC18-5
Figure 2-1-6 Conveying section block diagram
1 Lower registration roller
2 Upper registration roller
3 Frame base
4 Middle feed roller
5 Paper guides
6 Registration sensor
actuator
7 Switchback guide