Kyocera FS-6020 - Chapter 3: Maintenance Procedures; Toner Container Replacement

FS-6020
1-6-4
(3) Detaching and refitting the right cover
Procedure
1. Remove the top cover (see page 1-6-2).
2. Remove the rear cover (see page 1-6-5).
3. Draw the paper cassette.
4. Remove one screw and then remove the
optional interface slot cover.
5. Remove the four inner hooks and remove the
right cover.
Figure 1-6-3
Screw
Optional interface
slot cover
Right cover