Chapter 1 Using the Operator Panel
1-22
The MP tray can be used in one of two modes: cassette mode
or first mode. The MP tray can hold approximately 100 sheets
of paper (A4 size, 0.11 mm thickness).
■ Cassette Mode
Approximately 100 sheets of paper can be continuously fed in
this mode. This is the default setting.
■ First Mode (Automatic Manual Feeding)
The printer automatically feeds any paper placed on the MP
tray even if another paper source is selected. After all paper
in the MP tray has been fed out, paper will be fed from the pa-
per source originally selected.
Press the MENU key.
Press the or key repeatedly until Paper
Handling > appears.
Press the key.
Press the or key repeatedly until >MP Tray
Mode appears.
Press the ENTER key. A blinking question mark (?)
appears.
Select First or Cassette using the or key.
Press the ENTER key.
Press the MENU key. The message display returns to
Ready.
You can select from which paper source printing will be per-
formed. If no option units are installed, the only selections
are the paper cassette and MP tray of the printer. If option
paper feeders are installed, they can also be selected.
Press the MENU key.
Press the or key repeatedly until Paper
Handling > appears.
Press the key.
Press the or key repeatedly until >Feed
Select appears.
Press the ENTER key. A blinking question mark (?)
appears.
Press the or key to display the desired paper
source. The display changes as shown below accord-
ing to the installed option units.
Cassette(1) Printer’s standard paper cassette
Cassette 2 Option paper feeder, second paper
cassette
Cassette 3 Option paper feeder, third paper cas-
sette
Cassette 4 Option paper feeder, fourth paper
cassette
Cassette 5 Option paper feeder, fifth paper cas-
sette
MP tray Printer’s MP tray
Press the ENTER key.
Press the MENU key. The message display returns to
Ready.
Setting the MP Tray Mode
Paper Handling >
>MP Tray Mode
Cassette
>MP Tray Mode
? Cassette
1
2
3
4
5
6
7
8
Selecting the Paper Source
Paper Handling >
>Feed Select
Cassette
>Feed Select
? Cassette
1
2
3
4
5
6
7
8
To Next Page
Loading...
