Kyocera FS-6020 - Alternative Emulation for KPDL Emulation; Printing KPDL Errors

Chapter 1 Using the Operator Panel
1-26
To set the KC-GL page size, press the key, then
press the or key until >KC-GL Page Set is
displayed.
To change the page size, press the ENTER key. A
blinking question mark (?) appears.
Press the or key repeatedly until the desired
page size (A2, A1, A0, B3, B2, B1, B0, and SPSZ)
appears. When selecting SPSZ, printing will be done
with the paper size specified by the PRESCRIBE
SPSZ command. For details, see
PRESCRIBE
Commands Command Reference
in the CD-ROM.
Press the ENTER key to set the page set you just se-
lected.
Press the MENU key. The message display returns to
Ready.
Alternative Emulation for KPDL Emulation
For printing in the KPDL emulation mode, it is recommended
that you install expansion memory of 16 MB or more (total print-
er memory 32 MB or more).
The auto KPDL (KPDL (AUTO)) emulation enables the print-
er to automatically change the emulation mode according to
the print job received. The alternative emulation can be se-
lected using the operator panel. The default alternative emu-
lation is PCL 6.
Press the MENU key.
Press
the or key repeatedly until Emulation
appears.
Press the ENTER key. A blinking question mark (?)
appears.
Press the or key repeatedly until the message
display KPDL (AUTO) appears.
Press the ENTER key.
Press the key. When >Print KPDL Errs is dis-
played, press the or key. The display cycles
through the emulation in the following order:
PCL 6 (default)
KC-GL
KPDL
KPDL (AUTO)
Line Printer
IBM Proprinter
DIABLO 630
Epson LQ-850
Press the ENTER key. A blinking question mark (?)
appears.
Press the or key repeatedly until the desired
alternative emulation appears.
Press the ENTER key.
Press the MENU key. The message display returns to
Ready.
Printing KPDL Errors
The printer can print error descriptions when a printing error
occurs during KPDL emulation. The default is Off - the print-
er does not print KPDL errors.
Press the MENU key.
Press
the or key repeatedly until Emulation
appears.
>KC-GL Page Set
? [SPSZ]
NOTE
Emulation
PCL 6
Emulation
? PCL 6
11
12
13
14
1
2
3
Emulation
? KPDL (AUTO)
>Alt. Emulation
? PCL 6
Emulation
PCL 6
4
5
6
7
8
9
10
1
2