Chapter 1 Using the Operator Panel
1-48
Press the key.
Press the or key repeatedly until >Delete
Data appears. The data name also appears.
Press the ENTER key. A blinking question mark (?)
appears before the data name.
Press the or key to display the desired data
name.
Press the ENTER key. Processing appears and the
data is deleted from the memory card. The message
display returns to Ready.
Formatting a Memory Card
A new memory card must be formatted before it can be used
in the printer. Formatting allows data to be written to the
memory card.
• Formatting will destroy any existing data on a storage device
including a used memory card.
• Formatting of the memory card must be executed from the
printer.
To format a memory card, proceed as follows. When a new
memory card is inserted in the printer’s slot, Format error
Memory card will appear on the message display.
Press the MENU key.
Press the or key repeatedly until Memory
Card > appears.
Press the key.
Press the or key repeatedly until >Format ap-
pears.
Press the ENTER key. A question mark (?) appears.
Press the ENTER key. Processing appears and for-
matting of the memory card starts.
When the formatting is successfully completed, the
printer automatically prints out a format
information page, which allows you to check the
memory card for proper formatting.
Format information page includes the following
items:
Capacity: The total size of the memory card.
Used Space: The size the printer uses for its
system.
Free Space: The size remaining in the memory
card for storing data.
When the memory card format information is
printed, the message display returns to Ready.
Printing a List of Data Names (Partitions)
The printer prints a list of all data names (referred to as par-
titions) stored in a memory card for reference. (Printing a list
is also available for a font card.)
To print a list of data names for the memory card, proceed as
follows.
Press the MENU key.
Press the or key repeatedly until Memory
Card > appears.
Press the key.
Press the or key repeatedly until >List of
Partitions appears.
>Delete Data
DataS001
>Delete Data
?DataS001
NOTE
Memory Card >
>Format
3
4
5
6
7
1
2
3
4
5
>Format ?
Memory Card >
>List of
Partitions
6
FORMAT INFORMATION
1
2
3
4
To Next Page
Loading...
