EasyManua.ls Logo

Kyocera FS-6020 - Page 69

Kyocera FS-6020
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2 Paper Selection
2-2
Composition
Do not use paper that has been coated or surface-treated and
contains plastic or carbon. The heat of fusing can cause such
paper to give off harmful fumes. Such paper may cause dam-
age to the drum.
Bond paper should contain at least 80 % pulp. Not more than
20 % of the total paper content should consist of cotton or
other fibers.
Paper Size
Cassettes and an MP tray are available for the paper sizes
listed in the table above. The dimensional tolerances are ±0.7
mm (±0.0276 inches) for the length and width. The angle at
the corners must be 90° ±0.2°.
Smoothness
The paper should have a smooth, uncoated surface. Paper
with a rough or sandy surface can cause voids in the printed
output. Paper that is too smooth, however, can cause multiple
feeding and fogging problems. (Fogging is a gray background
effect.)
Basis Weight
Basis weight is the weight of a standard quantity of paper. In
the traditional system, the standard quantity is a ream
consisting of 500 sheets measuring 17 × 22 inches each. In the
metric system the standard quantity is 1 square meter.
Paper that is too light or too heavy can cause misfeeding,
jams, and premature wear of the printer. Uneven paper
weight can cause multiple feeds, print defects, poor toner
fusing, blurring, and other print quality problems. The proper
weight is 60 to 105 g/m
2
for the paper cassette, and 60 to 200
g/m
2
for the MP tray.
MP tray Size Cassette or MP tray Size
Monarch 3-7/8 × 7-1/2 inches Ledger 11 × 17 inches
Business 4-1/8 × 9-1/2 inches Legal 8-1/2 × 14 inches
Commercial #9 3-7/8 × 8-7/8 inches Letter 8-1/2 × 11 inches
Commercial #6-3/4 3-5/8 × 6-1/2 inches Executive 7-1/4× 10-1/2 inches
ISO DL 110 × 220 mm Folio 210 × 330 mm
ISO C5 162 × 229 mm ISO A3 297 × 420 mm
ISO A6 105 × 148 mm ISO A4 210 × 297 mm
JIS B6 128 × 182 mm ISO A5 148 × 210 mm
ISO B5 176 × 250 mm JIS B5 182 × 257 mm
Statement 5-1/2 × 8-1/2 inches JIS B4 257 × 364 mm
Hagaki 100 × 148 mm ISO C4 229 × 324 mm
Oufuku Hagaki 148 × 200 mm Oficio II 8-1/2 × 13 inches
Youkei 2 114 × 162 mm 8K 273 × 394 mm
Youkei 4 105 × 235 mm 16K 197 × 273 mm
Custom
for paper cassette
for MP tray
148 × 210 mm
(5-13/16 × 8-1/4 inches)
to
297 × 432 mm
(11-11/16 × 17 inches)
70 × 148 mm
(2-3/4 × 5-13/16 inches)
to
297 × 450 mm
(11-11/16 × 17-3/4 inches)

Table of Contents

Other manuals for Kyocera FS-6020

Related product manuals