Kyocera FS-6525MFP - Page 165

2MW/2MX
1-4-3
1403 PF feed sensor 1 non arrival
jam
PF feed sensor 1 (PFFS1) does not turn on during
paper feed from cassette 3.
E
1413 PF feed sensor 1 stay jam PF feed sensor 1 (PFFS1) does not turn off during
paper feed from cassette 3.
E
4002 Registration sensor non
arrival jam
The registration sensor (RS) does not turn on dur-
ing paper feed from cassette 2.
E
4003 The registration sensor (RS) does not turn on dur-
ing paper feed from cassette 3.
E
4012 Registration sensor stay jam The registration sensor (RS) does not turn off dur-
ing paper feed from cassette 2.
E
4013 The registration sensor (RS) does not turn off dur-
ing paper feed from cassette 3.
E
4201 Eject sensor non arrival jam The eject sensor (ES) does not turn on during
paper feed from cassette 1.
F
4202 The eject sensor (ES) does not turn on during
paper feed from cassette 2.
F
4203 The eject sensor (ES) does not turn on during
paper feed from cassette 3.
F
4208 The eject sensor (ES) does not turn on during
paper feed from duplex section.
F
4209 The eject sensor (ES) does not turn on during
paper feed from MP tray.
F
4211 Eject sensor stay jam The eject sensor (ES) does not turn off during
paper feed from cassette 1.
F
4212 The eject sensor (ES) does not turn off during
paper feed from cassette 2.
F
4213 The eject sensor (ES) does not turn off during
paper feed from cassette 3.
F
4218 The eject sensor (ES) does not turn off during
paper feed from duplex section.
F
4219 The eject sensor (ES) does not turn off during
paper feed from MP tray.
F
4301 Duplex sensor non arrival
jam
The duplex sensor (DUS) does not turn on during
paper feed from cassette 1.
F
4302 The duplex sensor (DUS) does not turn on during
paper feed from cassette 2.
F
4303 The duplex sensor (DUS) does not turn on during
paper feed from cassette 3.
F
4309 The duplex sensor (DUS) does not turn on during
paper feed from MP tray.
F
Code Contents Conditions
Jam
location*
*: Refer to figure 1-4-1 for paper jam location (see page 1-4-1).