2MW/2MX
1-3-3
High voltage U100 Setting the main high voltage
-/-/0/0
-/-/1800
off
U101 Setting the voltage for the primary transfer
0/0/0/0/190/650/900
1100/450/650/750
U108 Setting separation shift bias
4
U111 Checking the drum drive time
-
U118 Displaying the drum history
-
U127 Checking/clearing the transfer count
0/0
Developer U139 Displaying the temperature and humidity outside the
machine
-
U140 Displaying developer bias 170/2700/60
U147 Setting for toner applying operation Mode1
U150 Checking sensors for toner -
U157 Checking the developer drive time -
Fuser U161 Setting the fuser control temperature 135/150/165/175/1/1
U199 Displaying fuser heater temperature -
Operation
panel and
support
equipment
U201 Initializing the touch panel -
U203 Checking DP operation -
U207 Checking the operation panel keys -
U222 Setting the IC card type Other
U243 Checking the operation of the DP motors -
U244 Checking the DP switches -
Mode setting U250 Checking/clearing the maintenance cycle 300000/0
U251 Checking/clearing the maintenance counter 0/0
U252 Setting the destination -
U253 Switching between double and single counts Double count
(A3/Ledger)
U260 Selecting the timing for copy counting Eject
U265 Setting OEM purchaser code -
U285 Setting service status page On
U326 Setting the black line cleaning indication On/8
U332 Setting the size conversion factor 1.0
U341 Specific paper feed location setting for printing function Off/Off/Off
U343 Switching between duplex/simplex copy mode Off
U345 Setting the value for maintenance due indication 0
Section
Item
No.
Content of maintenance item
Initial
setting
To Next Page
Loading...
