2MW/2MX
1-3-25
U053 Setting the adjustment of the motor speed
Description
Performs fine adjustment of the speeds of the motors.
Purpose
To adjust the speed of the respective motors when the magnification is not correct.
Method
1. Press the start key.
2. Press the system menu key.
3. Place an original and press the start key to make a test copy.
4. Press the system menu key.
5. Select the item to be adjusted.
6. Change the setting value using the cursor left/right keys or numeric keys.
7. Press the start key. The value is set.
Completion
Press the stop key. The indication for selecting a maintenance item No. appears.
Item No. Description
Display Description
Setting
range
Initial
setting
Main Main motor (MM) speed adjustment -50 to 50 -2
Main(MPT) Main motor (MM) speed adjustment
in MPT output
-50 to 50 -2
Main(Duplex) Main motor (MM) speed adjustment
in duplex output
-50 to 50 -6
Polygon Polygon motor (PM) speed adjustment -20 to 20 0
Exit Eject motor (EM) speed adjustment -40 to 40 0
To Next Page
Loading...
