4-5
Sending Faxes > Basic transmission procedure
Cancelling the Transmission
The method for cancelling communication with this machine differs depending on the transmission method (memory
transmission or direct transmission) and communication form. Methods of cancelling in various cases are explained
here.
Cancelling Memory Transmission (while originals are being scanned)
1
Press the Stop key.
During memory transmission, to cancel scanning while originals are being scanned, press the
Stop key on the operation panel, or press [Cancel] on the touch panel.
Scanning of originals is canceled, and the originals are ejected. When originals remain in the
document processor, take them out from the original output table.
Cancelling Memory Transmission (during communication)
1
Press the Status/Job Cancel key.
2
Canceling Transmission.
Select the transmission job that you want to cancel and press [Cancel]. Select [Yes] to cancel
the transmission.
NOTE
In some cases, transmission may take place even if the
Stop
key or [Cancel] key is pressed.
Status/Job Cancel.
Status
Print Job Status
10:10
Send Job Status
Store Job Status
Scheduled Job
Pause All
Print Jobs
1/4
Send Job Status
10:10Status/Job Cancel.
0123456
Cancel CloseMenu
Process
1/1
0005
1
3
GB0052_00
GB0183_00
2
4
To Next Page
Loading...
