Printer Properties
17
Installing Optional
Devices
If you use optional devices such as a paper feeder, finisher or an additional hard disk, specify
the device on the Device Settings tab of the device properties. You can also specify the
memory setting, PDL settings for the user, administrator settings for front panel messages
passwords, and more.
Installing Optional Printer Devices
1. Click the Device Settings tab.
2. In the Device Options of the Device Settings tab, enable the check boxes for any
optional devices installed in your printer.
Some optional devices cannot be installed simultaneously. For example, a finisher and a
booklet stitcher. After you have selected a device, all other devices will be marked with a red
X, preventing the ability to select conflicting optional devices. For further details on which
optional devices can be installed for each model, refer to Table of Supported Options
on
page 137.
To Next Page
Loading...
