34
To print in User Login mode with Verify ID for Each Login User, follow these
steps:
1. In the Device Settings tab, click Administrator, to open the Administrator Settings
dialog box.
2. Select User Login.
3. Select Verify ID for Each Login User.
4. Click OK in the Administrator Settings dialog box and in the Device Settings tab.
5. Open your application and print the document.
The driver will search for a User Name in the User ID list.
• If a match is found, the User ID will be used for the print job.
• If a match is not found, the driver will check for Administrator or User privileges:
• A user with Administrator privileges will be prompted to enter a User ID and
password to print the job. The driver will search for a Windows Login User Name
and add this name with the User ID and password to the User ID List in the driver.
• If the user has only User privileges, the print job will be cancelled, and the user will
be prompted to see the Administrator for printing privileges.
6. Click OK.
To Next Page
Loading...
