Printing from Applications
73
Color Mode Definitions
If you specify Custom as the Color Mode in the proceeding step, you can make the Custom
settings. Detailed settings are available for Gray Component Replacement, Continuous
Tone, Gloss Mode, and Monochrome options and descriptions shown below.
1. For the Color Mode, select Custom.
2. Click the [...] button next to drop-down list to display the Color Mode Settings dialog box.
3. Select the check box for your preferred settings.
4. Click OK.
Color Mode Setting Item
Options
Descriptions
Gray Component
Replacement
Instead of deriving a black color by mixing CMY toners, the
black toner is used. This conserves CMY toners and improves
the quality of black printing.
Continuous Tone Pixels are printed in multiple layers. This mode is best for
printing photographs.
Gloss Mode Enhances the luster of printing. Gloss Mode is not supported for
duplex printing.
Monochrome Converts color data to grayscale for printing. This function can
be used for a preview before printing in color mode. Gray
Component Replacement and Continuos Tone cannot be
used with the monochrome mode.
To Next Page
Loading...
