Kyocera FS-720 - Page 98

92
4. From the Media for Cover drop-down list, select the media type or source cassette for
the front and back covers. When you choose the media type, a source cassette matching
that media is automatically selected.
Heavy, thin, or other special papers must be supplied from the multi-purpose tray.
Media type selections are not supported for the following models:
KM-1510, KM-1530, KM-1810, KM04230, KM-5230, and KM-6230.
5. Click OK to return to the Media dialog box.
6. Load the paper for the front and back cover in the paper cassette selected in step 4.
7. Click OK to return to the Print dialog box
Front and Back
5Back Inside
5Back Outside
Duplex Printing (page 50).
• Prints on the inside surface of the front cover and
inserts a blank back cover.
Front and Back
5Front Outside
5Front Inside
5Back Inside
5Back Outside
Duplex Printing (page 50).
• Prints on both sides of the front cover and inserts a
blank back cover.
Check Box Selection Cover Insertion Type
Front
cover
Back
cover
Back
cover
Front
cover