Kyocera FS-C1020MFP+ - Using the Machine as a Copier

Printing confidential documents
1. Use the printer driver to send a print job as a Locked Print file from a computer.
For details, see p.139 "Storing a Locked Print file".
2. Enter the password using the control panel to print the file.
For details, see p.140 "Printing a Locked Print file".
Using the Machine as a Copier
This section describes some useful functions of this machine when used as a copier.
Making enlarged or reduced copies
This machine has preset ratios for scaling originals, to make it easy to convert documents between
different standard sizes.
CES103
Preparation for making enlarged or reduced copies
To always enlarge or reduce copies:
1. Configure the machine's default [Reduce/Enlarge] setting.
For details, see p.245 "Copy Settings".
To use this function for the current job only:
1. Configure the setting using the [Reduce/Enlarge] key before starting the current job.
For details, see p.154 "Making Enlarged or Reduced Copies".
Copying multiple pages onto a single sheet of paper
You can copy multiple pages of an original onto a single sheet of paper.
• This function is only available when the original is set in the ADF, not when it is set on the exposure
glass.
1. Guide to the Machine
20