Kyocera FS-C1020MFP+ - Sorting the Output Paper

Preparation for copying an ID card
To always make photocopies in ID card copy mode:
1. Configure the machine's default [Reduce/Enlarge] setting.
For details, see p.245 "Copy Settings".
To use this function for the current job only:
1. Press the [ID Card Copy] key before starting the current job.
For details, see p.158 "Copying Both Sides of an ID Card onto One Side of Paper".
Making 2-sided copies
You can make 2-sided copies by copying single-sided documents onto the front and back sides of the
paper.
• This function is only available when the original is set in the ADF, not when it is set on the exposure
glass.
CES124
Change the machine's default setting to apply 2-sided copying.
Preparation for making 2-sided copies
1. Configure the [2 Sided Copy] setting under copy settings
For details, see p.161 "Making 2-sided Copies".
Sorting the output paper
When making multiple copies of multiple pages, you can configure the machine to sort the output pages
into sets.
• This function is only available when the original is set in the ADF, not when it is set on the exposure
glass.
1. Guide to the Machine
22