Kyocera FS-C5015N - Page 17

2HJ/2HK-1
1-1-3
20/22 ppm printer (EUR/USA model)
Type................................................Desktop
Printing system ...............................Electrophotographic four color (CMYK) printing using Advanced Beam Array
Paper type ......................................Cassette:
Plain, preprinted, bond, recycled, rough, letterhead, color, prepunched, high quality,
and custom
MP tray:
Plain, transparency, preprinted, labels, bond, recycled, vellum, rough, letterhead,
color, prepunched, envelope, cardstock, coated, thick, high quality, and custom
Paper sizes.....................................Cassette:
A4, B5, A5, Folio, 8
1/2" × 14" (Legal), 8 1/2" × 11" (Letter), Oficio II, Executive,
ISO B5, Envelope C5, 16K, and Custom
MP tray:
A4, B5, A5, Folio, 8
1/2" × 14" (Legal), 8 1/2" × 11" (Letter), Oficio II, Statement,
Executive, A6, B6, ISO B5, Env. Monarch, Envelope #10, Envelope #9,
Envelope #6, Envelope DL, Envelope C5, 16K, Hagaki, Oufuku-Hagaki, Youkei 2,
Youkei 4, and Custom
Print speeds....................................Cassette:
A4: 20 pages/minute
B5: 22 pages/minute
A5: 22 pages/minute
Letter: 22 pages/minute
Legal: 18 pages/minute
MP tray:
A4: 19 pages/minute
B5: 20 pages/minute
A5: 20 pages/minute
Letter: 20 pages/minute
Legal: 16 pages/minute
First print time.................................Standby mode: 13 seconds or less (A4)
Sleep mode: 81 seconds or less (A4)
Warm-up time .................................Sleep mode: 68 seconds or less (room temperature 22
°C/71.6 °F, 60%RH)
Power on: 68 seconds or less (room temperature 22
°C/71.6 °F, 60%RH)
Paper feed system..........................One universal cassette and one MP tray
Paper loading capacity ...................Cassette: 500 sheets (80 g/m
2
, 0.11 µm) 16~28lb. Bond
MP tray: 100 sheets (80 g/m
2
, 0.11 µm) 16lb. Bond~110lb. Index
Paper eject system .........................Face down: 250 sheets (80 g/m
2
, 0.11 µm), equipped with a face-down paper full sen-
sor
Face up: 100 sheets (optional face-up tray PT-301 must be installed)
Photoconductor...............................OPC drum (diameter 30 mm)
Charging system.............................Scorotron (positive charging)
Light source ....................................LED
Developing system .........................Touch down development method
Developer: Two-component
Toner replenishing: Automatic from the toner container
Transfer system ..............................Primary transfer: Transfer belt (negative-charged)
Secondary transfer: Transfer roller (negative-charged)
Separation system..........................Small radius curvature separation
Fixing system..................................Heat roller (diameter 36.5 mm, 850 W halogen heater lamp) [Oil-less]
Press belt
Charge erasing system...................Exposure by eraser lamp (LED)
Cleaning system .............................Drum: Counter blade
Primary transfer belt: Fur brush