Kyocera FS-C5025N - Page 32

2HJ/2HK
1-2-10
1-2-7 Installing the network interface card (optional)
<Procedure>
1. Turn off printer power.
2. Remove the two screws and then remove
the optional interface slot cover.
3. Insert the network interface card into the
optional interface slot.
4. Use the two screws to secure the network
interface card.
Figure 1-2-15
5. Connect the network cable.
6. Configure the network interface card. (See
the IB-2x quick configuration guide.)
Figure 1-2-16
Optional interface slot
Screws
Cover
Network
interface card
Network
interface card
Network cable