2KA
1-3-93
U473
Setting: [Correction]
1. Select On or Off.
Initial setting: On
2. Press the OK key. The setting is set.
Setting: [Density Adjust]
1. Select the color.
2. Press the OK key.
3. Enter the setting value on the sheet suppled with LSU using the Left/Right Select keys.
4. Press the OK key. The value is set.
Setting: [Emit Time/Dot]
1. Select [Black] or [All].
2. Press the OK key.
3. Select the item.
Initial setting: All / 0
4. Press the OK key. The setting is set.
Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
Off Do not correct the sensitivity
On Correct the sensitivity
Display Description
Cyan Exposure density correction value for cyan
Magenta Exposure density correction value for magenta
Yellow Exposure density correction value for yellow
Black Exposure density correction value for black
Display Description Setting range
X0 - X10 Enter the setting value for cyan -30 to 30
Display Description
Black LSU laser output for black
All LSU laser output for all colors
Display Description
0 (100%) LSU laser output (100%)
1 (90%) LSU laser output (90%)
2 (80%) LSU laser output (80%)
3 (70%) LSU laser output (70%)
To Next Page
Loading...
