Kyocera FS-C8500DN - (11) Security; (12) Job Accounting settings

2KA
1-3-112
(11) Security
Network Security (Network security setting)
Netware (NetWare setting)
1. Select [Network Security] and press the OK key.
2. Select [Netware] and press the OK key.
Off/On (NetWare operation setting)
1. Select [Off/On] and press the OK key.
2. Select [On] or [Off] and press the OK key.
Frame Type (Frame Type setting)
1. Select [Frame Type] and press the OK key.
2. Select Frame Type and press the OK key.
Auto/802.3/Ether-II/802.2/SNAP
AppleTalk (AppleTalk setting)
1. Select [Network Security] and press the OK key.
2. Select [AppleTalk] and press the OK key.
3. Select [On] or [Off] and press the OK key.
IPP (IPP setting)
1. Select [Network Security] and press the OK key.
2. Select [IPP] and press the OK key.
3. Select [On] or [Off] and press the OK key.
SSL Setting (SSL Server setting)
1. Select [Network Security] and press the OK key.
2. Select [SSL Setting] and press the OK key.
Off/On (SSL operation setting)
1. Select [SSL] and press the OK key.
2. Select [Off/On] and press the OK key.
3. Select [On] or [Off] and press the OK key.
Encryption (Encryption setting)
1. Select [SSL] and press the OK key.
2. Select [Encryption] and press the OK key.
3. Select the encryption method and press the OK
key.
AES/DES/3DES
4. Press [Complete] (Right Select key).
IPP over SSL (SSL Server IPP over SSL setting)
1. Select [IPP over SSL] and press the OK key.
2. Select [On] or [Off] and press the OK key.
HTTPS (SSL Server HTTPS setting)
1. Select [HTTPS] and press the OK key.
2. Select [On] or [Off] and press the OK key.
IPSec (IPSec setting)
1. Select [Network Security] and press the OK key.
2. Select [IPSec] and press the OK key.
3. Select [On] or [Off] and press the OK key.
I/F Block Set. (External interface block setting)
USB Host (USB memory slot setting)
1. Select [I/F Block Set.] and press the OK key.
2. Select [USB Host] and press the OK key.
3. Select [Block] or [Unblock] and press the OK key.
USB Device (USB interface setting)
1. Select [I/F Block Set.] and press the OK key.
2. Select [USB Device] and press the OK key.
3. Select [Block] or [Unblock] and press the OK key.
Option I/F (Network interface card (NIC) setting)
1. Select [I/F Block Set.] and press the OK key.
2. Select [Option I/F] and press the OK key.
3. Select [Block] or [Unblock] and press the OK key.
(12) Job Accounting settings
Job Accounting (Job Accounting settings)
1. Select [Job Accounting] and press the OK key.
2. Select [On] or [Off] and press the OK key.
Account. Report (Account report printing)
1. Select [Account. Report] and press the OK key.
2. Press [Yes] (Left Select key).
The job accounting list is printed.
Each Job Account (Totals display by account)
1. Select [Each Job Account] and press the OK key.
2. Select an accoun and press the OK key.
3. Select [Printed Pages] and press the OK key.
The Printed Pages menu list screen appears.
Each Job Account Counter Reset (Totals reset by
account)
1. Select [Each Job Account] and press the OK key.
2. Select an accoun and press the OK key.
3. Select [Counter Reset] and press the OK key.
4. Press [Yes] (Left Select key).
The counter is reset.
Account. List (Account List operation)
Add (Account registration)
1. Select [Account. List] and press the OK key.
2. Press [Add] (Right Select key).
3. Enter the account ID and press the OK key.
4. Press [Enter] (Right Select key).