Kyocera FS-C8520MFP - Page 374

2MY/2MZ-2
No. Content
Check procedure & check point
Remark 1
TASKalfa 256ci/FS-C8525MFP, TASKalfa 206ci/FS-C8520MFP,
TASKalfa 306i/FS-6530MFP, TASKalfa 256i/FS-6525MFP
F1CX
An error is detected at the File
System management section
1) Format the HDD and check function. (U024 FULL formatting) (*1)
2) Execute the U021 Memory initializing to initialize the controller backup memory and check
function.
3) Replace the main board and check function.
4) Replace the HDD and check function. (*1)
5) Retrieve the USBLOG and contact the Service Administrative Division.
(
*1
)
For the HDD standard model onl
y
.
*The F1C4 error appears
with the HDD security kit at
work.
F1DX
An error is detected at the
Image memory management
section
1) Format the HDD and check function. (U024 FULL formatting) (*1)
2) Execute the U021 Memory initializing to initialize the controller backup memory and check
function.
3) Replace the main board and check function.
4) Replace the HDD and check function. (*1)
5) Retrieve the USBLOG and contact the Service Administrative Division.
(
*1
)
For the HDD standard model onl
y
.
*The F1D4 error is RAM
allocation error.
1. Check it with the U340
2. Initialize the setting
valued with the U021
F1EX
F1FX
F20X
F21X
F22X
F23X
F24X
An error is detected at the
System management section
1) Check contact of the DDR memory and check function.
2) Format the HDD and check function. (U024 FULL formatting) (*1)
3) Execute the U021 Memory initializing to initialize the controller backup memory and check
function.
4) Replace the main board and check function.
5) Replace the HDD and check function. (*1)
6) Retrieve the USBLOG and contact the Service Administrative Division.
(*1) For the HDD standard model only.
*The F248 eror is printer
process error. if it repeats
with a certain print data,
retrieve the capture data
and USBLOG.
[DIMM]
<Monochrome models: Option>
<Color models: Standard>
[DDR2 memory contact check]
Main board: YS1
A certain part of the memory may be faulty. The frequency of
faiure occurrence is dependent on the frequency of access to the
faulty bit.
The memories except the DIMM are mounted on the main PWB.
The mounted memories or the ASIC may be faulty if the DIMM is
not sensitive.
An error is detected at the
Image processing section
1) Check contact of the DDR memory and check function.
2) Format the HDD and check function. (U024 FULL formatting) (*1)
3) Execute the U021 Memory initializing to initialize the controller backup memory and check
function.
4) Replace the main board and check function.
5) Replace the HDD and check function. (*1)
6) Retrieve the USBLOG and contact the Service Administrative Division.
(*1) For the HDD standard model only.
An error is detected at the OS
or some of device drivers
1) Format the HDD and check function. (U024 FULL formatting) (*1)
2) Execute the U021 Memory initializing to initialize the controller backup memory and check
function.
3) Replace the main board and check function.
4) Replace the HDD and check function. (*1)
5) Retrieve the USBLOG and contact the Service Administrative Division.
(*1) For the HDD standard model only.
[DIMM]
<Monochrome models: Option>
<Color models: Standard>
[DDR2 memory contact check]
Main board: YS1
A certain part of the memory may be faulty. The frequency of
faiure occurrence is dependent on the frequency of access to the
faulty bit.
The memories except the DIMM are mounted on the main PWB.
The mounted memories or the ASIC may be faulty if the DIMM is
not sensitive.
2-4-14