2MN/2N1
1-4-3
* : This model does not support the following codes:
0132 /0505 /0515 /9030
Code Contents Conditions
Jam
location*
0000 Initial jam The power is turned on when a sensor in the convey-
ing system is on.
-
0100 Secondary paper feed
request time out
Secondary paper feed request given by the controller
is unreachable.
-
0101 Waiting for process
package to become
ready
Process package won’t become ready. -
0102 Waiting for toner pack-
age to become ready
Toner package won’t become ready. -
0103 Waiting for the image-
sustaining package to
become ready
The image-sustaining package won’t become ready. -
0104 Waiting for conveying
package to become
ready
Conveying package won’t become ready. -
0106 Paper feeding request
for duplex printing time
out
Paper feeding request for duplex printing given by the
controller is unreachable.
-
0107 Waiting for fuser pack-
age to become ready
Fuser package won’t become ready. -
0108 Waiting for option pack-
age to become ready
Option package won’t become ready. -
0110 Paper conveying unit
open
The paper conveying unit is opened during printing. E
0111 Front cover open The front cover is opened during printing. -
0112 Duplex cover open The duplex cover is opened during printing. F
0113 Paper conveying cover
open
The paper conveying cover is opened during printing. E
0114 BR conveying unit open The BR conveying unit is opened during printing. G
0115 BR eject cover open The BR eject cover is opened during printing. G
0131 MP lift sensor upper limit
detection
MP lift sensor 1 (MPLS1) does not turn on within spec-
ified time of the MP lift plate rising.
D
0200 Machine sequence error A sequence error has caused. -
0210 PF paper conveying
cover open
The PF paper conveying cover is opened during print-
ing.
E
*: Refer to figure 1-4-1 for paper misfeed indication (see page 1-4-1).
To Next Page
Loading...
