Kyocera FS-C8600DN - Page 533

2MN/2N1-1
2-4-13
*: Ignored in some emulation modes.
Paper type for optional cassettes
3 to 7
X3
X4
X5
X6
X10
1: Plain
3: Preprinted
5: Bond
6: Recycled
9: Letterhead
10: Color
11: Prepunched
17: High quality
21 to 28: Custom1 to 8
1
PCL paper source X9 0: Performs paper selection depending on
media type.
2: Performs paper selection depending on
paper sources.
0
Automatic continue for ‘Press
GO’
Y0 0: Off
1: On
0
Automatic continue timer Y1 Value in units of 5 seconds (1 to 99) 6 (30 s)
Error message for device error Y3 0: Not detect
64: Detect
64
Duplex operation for specified
paper type
(Prepunched, Preprintedand Let-
terhead)
Y4 0: Off
1: On
0
Default operation for PDF direct
printing
Y5 0: Enlarges or reduces the image to fit in the
current paper size. Loads paper from the
current paper cassette.
1: Through the image. Loads paper which is
the same size as the image.
2: Enlarges or reduces the image to fit in the
current paper size. Loads Letter, A4 size
paper depending on the image size.
3: Through the image. Loads Letter, A4 size
paper depending on the image size.
8: Through the image. Loads paper from the
current paper cassette.
9: Through the image. Loads Letter, A4 size
paper depending on the image size.
10: Enlarges or reduces the image to fit in the
current paper size. Loads Letter, A4 size
paper depending on the image size.
0
e-MPS error Y6 0: Does not print the error report and display
the error message.
1: Prints the error report.
2: Displays the error message.
3: Prints the error report and displays the error
message.
3
Item FRPO Setting values
Factory
setting