2MN/2N1-1
1-3-10
U000 Method: Send to the USB memory
1. Perform shut-down on the operation panel, turn power off (see page p.1-2-19).
2. Insert USB memory in USB memory slot.
3. Turn the main power switch on.
4. Enter the maintenance item.
5. Press the OK key.
6. Select the item to be send.
7. Select [Text] or [HTML].
8. Press the OK key.
Output will be sent to the USB memory.
Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Output list
Print Outputs the report
USB (Text) Sends output data to the USB memory (text type)
USB (HTML) Sends output data to the USB memory (HTML type)
To Next Page
Loading...
