4-6
4. Printer Driver for WindowsNT
■ EcoPrint:
Saves on toner. Setting can be made in the “Change ‘EcoPrint’ Setting” area. The factory default setting is “Off”.
■ Edge Smoothing:
Turning this setting “On” allows the jaggies that appear around the edge of text and graphics to be evened out through the smoothing
process.
■ PagePolicy:
Perform this setting in conjunction with the settings to be made under “Paper source” on page 4-4.
[Auto Size Select] ......................Select this setting when you want to select “Automatically Select” under “Paper source”.
[Cassette Base] .........................Select this setting when you want to select the source of paper feed according to the tray under
“Paper source”.
* If you are going to select “Automatically Select” under “Paper source”, be sure to select “Auto Size Select” here or there is a possibility
that printing will be accomplished onto paper that is difference the expected.
■ Job Spooling:
Allows you to select whether to sort the copies in the case of multiple copy.
[None] ........................................Does not sort.
[Sort] .........................................Prints in the order of 1st, 2nd, 3rd copies and so on.
* It is necessary to create a RAM disk. (Refer to page 4-7.)
4-7-2 Printer Features
To Next Page
Loading...
