2DA/2DB
1-4-24
U093
Setting the exposure density gradient
Description
Changes the exposure density gradient in manual density mode, depending on respective image modes (text,
text and photo, photo, text in fax mode, photo in fax mode).
Purpose
To set how the image density is altered by a change of one step in the manual density adjustment. Also used
to make copy image darker or lighter.
Start
1. Press the start key. The screen for selecting an item is displayed.
2. Select the image mode to be adjusted using the up/down cursor keys and press the start key. The
screen for the selected item is displayed.
Setting: Density in text and photo mode
1. Select the item to be adjusted using the up/down cursor keys. The selected item is displayed in reverse.
2. Adjust the setting using the left/right cursor keys.
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
Figure 1-4-4 Exposure density gradient
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Setting: Density in text mode
1. Select the item to be adjusted using the up/down cursor keys. The selected item is displayed in reverse.
2. Adjust the setting using the left/right cursor keys.
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Maintenance
item No.
Description
Display Description
MIXED Density in text and photo mode
TEXT Density in text mode
PHOTO Density in photo mode
FAX TEXT Density in the text in fax mode
FAX PHOTO Density in the photo in fax mode
Display Description Setting range Initial setting
MIXED DARKER Change in density when manual
density is set dark
0 to 3 0
MIXED LIGHTER Change in density when manual
density is set light
0 to 3 0
Image density
Density adjustment
Dark
Light
Light
Center
Dark
Setting: 0
Setting: 3
Set to DARKER
Set to LIGHTER
Display Description Setting range Initial setting
TEXT DARKER Change in density when manual
density is set dark
0 to 3 0
TEXT LIGHTER Change in density when manual
density is set light
0 to 3 0
To Next Page
Loading...
