Kyocera KM-1650 - Page 94

2DA/2DB-3.0
1-4-25
U093
Setting: Density in photo mode
1. Select the item to be adjusted using the up/down cursor keys. The selected item is displayed in reverse.
2. Adjust the setting using the left/right cursor keys.
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Setting: Density in the text in fax mode
1. Select the item to be adjusted using the up/down cursor keys. The selected item is displayed in reverse.
2. Adjust the setting using the left/right cursor keys.
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Setting: Density in the photo in fax mode
1. Select the item to be adjusted using the up/down cursor keys. The selected item is displayed in reverse.
2. Adjust the setting using the left/right cursor keys.
*Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Interrupt copy mode
While this maintenance item is being performed, copying from an original can be made in interrupt copy
mode.
1. Press the interrupt key. The machine enters the interrupt copy mode.
2. Set the original and press the strat key.
To return to the screen for setting, press the interrupt key.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No.
is displayed.
Maintenance
item No.
Description
Display Description Setting range Initial setting
PHOTO DARKER Change in density when manual
density is set dark
0 to 3 0
PHOTO LIGHTER Change in density when manual
density is set light
0 to 3 0
Display Description Setting range Initial setting
FAX TEXT DARKER Change in density when manual
density is set dark
0 to 4 0
FAX TEXT LIGHTER Change in density when manual
density is set light
0 to 4 2
Display Description Setting range Initial setting
FAX PHOTO DARKER Change in density when manual
density is set dark
0 to 6 3
FAX PHOTO LIGHT Change in density when manual
density is set light
0 to 6 3