System Settings
5-11
Changing Function Defaults
Perform the following procedure to change the default settings for the various functions of this
machine. For functions that you use often, changing the default value to the desired setting will
minimize the time required to make that setting each time the corresponding function is used.
The following shows the functions for which the default values can be changed and their available
settings.
Note The current settings are shown with an asterisk (*).
1
Press the System Menu/Counter key. The Sys. Menu/Count screen is displayed.
2
Press the S key or the T key to select Function
Select and press the Enter key. The Function
Default screen is displayed.
Function Available Settings Reference Page
Scan Color Select
*
Full Color
Grayscale
Monochrome
2-6
Scan Resolution * 200 × 200 dpi
300 × 300 dpi
400 × 400 dpi
600 × 600 dpi
2-8
Original Quality * Text + Photo
Photo
Text
1-6, 2-7
Exposure
*
Auto
Manual
1-7, 2-9
Zoom
*
Auto
100%
1-9, 2-12
Collate
*
Off
On
1-13
Orig. Placement
*
Top Edge to Rear
Top Edge to Left
1-12, 2-13
File Name Entry doc 1-22, 2-18
File Name Entry/Additional
Info.
*
None
Date and Time
Job No.
-
Sys. Menu/Count.:
Copy Setting
Printer Setting
Function Default
Exit
To Next Page
Loading...
