System Settings
5-26
Low Power Timer
The machine has a Low Power Timer that is used to conserve power when the machine is not
copying, scanning, printing, or receiving data. You can adjust the timer timeout time, the length of
time (between 1 minute and 240 minutes) the machine waits before entering low power mode in the
absence of data. The factory default time is 5 minutes.
The machine wakes from low power mode whenever any one of the keys on the operator panel is
pressed, an original is set from document processor, the cassettes or MP tray are opened or closed,
or a print job is received.
1
Press the System Menu/Counter key. The Sys. Menu/Count screen is displayed.
2
Press the S key or the T key to select Date/Timer
Set and press the Enter key. The Date/Timer Set
screen is displayed.
3
Press the S key or the T key to select Low Power
Timer and press the Enter key. The Low Power
Timer screen is displayed.
4
Press the S key or the T key to select the desired
time for the Low Power Timer to engage and press the
Enter key. The message display shows Completed
and returns to the Date/Timer Set screen.
Sys. Menu/Count.:
System Setting
Date/Timer Set.
Adjust
Exit
Date/Timer Set.:
Summer Time
Reset Timer
Low Power Timer
Exit
Low Power Timer:
(1
10 min
~240)
Cancel
To Next Page
Loading...
