System Settings
5-29
Auto Error Clear
If a printing error occurs that still allows printing to continue, setting Auto Error Clear to On enables
the next job to be printed after a set recovery period (Error Clear Time) has elapsed. The factory
default setting for Auto Error Clear is Off. The Error Clear Time period can be set between 5 and
495 seconds. The factory default time is 30 seconds.
Enabling Auto Error Clear
1
Press the System Menu/Counter key. The Sys. Menu/Count screen is displayed.
2
Press the S key or the T key to select Date/Timer
Set and press the Enter key. The Date/Timer Set
screen is displayed.
3
Press the S key or the T key to select Auto Err.
Clear and press the Enter key. The Auto Err.
Clear screen is displayed.
4
Press the S key or the T key to select either On or
Off and press the Enter key. The message display
shows Completed and returns to the Date/Timer
Set screen.
Sys. Menu/Count.:
System Setting
Date/Timer Set.
Adjust
Exit
Date/Timer Set.:
Auto Panel Reset
Auto Sleep
Auto Err. Clear
Exit
Auto Err. Clear:
Off
On
*
Cancel
To Next Page
Loading...
