Kyocera KM-1815 - Page 125

System Settings
5-34
5
Press the S key or the T key to select Custom and
press the Enter key. The Size Entry(Y) screen is
displayed.
6
Press the S key or the T key to select the height of
the print paper to be registered.
Once the desired height is displayed, press the Enter
key. The Size Entry(X) screen is displayed.
7
Press the S key or the T key to select the width of the
print paper to be registered.
Once the desired width is displayed, press the Enter
key. The message display shows Registered and
returns to the Orig./Paper Set screen.
Custom PaperSize:
Custom
Back
Exit
Size Entry(Y):
(5.83
7.00
"
~ 14.02)
Cancel
Size Entry(X):
(3.15
7.00 "
~8.50)
Cancel