System Settings
5-42
Selecting the Paper Feed Source
Perform the following procedure to select the default setting. If an optional paper feeder is installed,
it is also available for the default paper source.
1
Press the System Menu/Counter key. The Sys. Menu/Count screen is displayed.
2
Press the S key or the T key to select Common
Setting and press the Enter key. The Common
Setting screen is displayed.
3
Press the S key or the T key to select Orig./Paper
Set and press the Enter key. The Orig./Paper Set
screen is displayed.
4
Press the S key or the T key to select Def. Paper
Input and press the Enter key. The Def. Paper
Input screen is displayed.
5
Press the S key or the T key to select the paper feed
location that you want to be used as the default setting
and press the Enter key. The message display shows
Registered and returns to the Orig./Paper Set
screen.
Note If cassette 2 is installed in your machine, it will be possible to select that cassette as the default.
Sys. Menu/Count.:
Date/Timer Set.
Adjust
Common Setting
Exit
Common Setting:
Default Operat.
Sound Setting
Orig./Paper Set.
Exit
MP Tray Set.
Media Type Adj.
Def. Paper Input
Orig./Paper Set.:
Exit
Def. Paper Input:
*
Cancel
Cassette1
MP Tray
Cassette2
To Next Page
Loading...
