Using COMMAND CENTER
6-3
Accessing COMMAND CENTER
To connect to COMMAND CENTER with a web browser:
1
Run the web browser.
2
In Address or Location, enter the machine IP address as the URL, e.g. http://10.183.51.33/. The
home page displays basic information about the machine and COMMAND CENTER as well as the
current status of the machine.
3
Select a category from the navigation bar on the left to view and set values for that category.
Note If COMMAND CENTER Admin password has been set, you will be prompted to enter a user name
and password when accessing any of the screens other than the home page. If no Admin password
has been set, access to all other pages is unrestricted. The administrator password may be defined
on the Basic page. If prompted to enter User name and Password, any value may be entered for
User Name (including leaving it blank). For Password, enter COMMAND CENTER Admin
password.
To Next Page
Loading...
