Copying Functions
1-20
1
Set the original.
2
Press the Copy key. The copy basic screen is displayed.
3
Press the Start key. The first original is scanned.
4
Once the scanning operation is completed, Set
original and press Start key is displayed.
Position the next original on the platen and press the
Start key. The next original is scanned.
5
Repeat step 4 until all originals have been scanned.
6
When all originals have been scanned, press the right
Select key. Accepted will appear and copying
commences.
*
Set original
Page:
Cancel
Job No.:
1
123
and press Start key.
End Scan
*
Set original
Page:
Cancel
Job No.:
6
123
and press Start key.
End Scan
To Next Page
Loading...
