Copying Functions
1-22
Entering the Name of Copying Jobs
The file name is used for e-mail report that notifies the finish of copying (Refer to page 1-24) and
also listed in the Status menu for administration. The copying job is named depending on the time
stamp or job number.
1
Press the Copy key. The copy basic screen is displayed.
2
Press the Function key.
3
Press the S key or the T key to select File Name
Entry. Press the Enter key. The File Name Entry
screen is displayed.
4
Enter the desired file name using the keypad. Press
the Enter key. The Additional Info screen is
displayed.
Notes • The factory default setting for the file name is doc.
• The file name can be between one and 30 characters long. Refer to Chapter 3 in Basic
Operation Guide, Character Entry.
5
Press the S key or the T key to select the information
that is added to the file name. Refer to the following
table for more information.
*
EcoPrint
Continuous Scan
File Name Entry
Function:
Exit
File Name Entry:
Text
ABC
Cancel
doc
*
Additional Info.:
Cancel
Date and Time
Job No.
None
*
To Next Page
Loading...
