Kyocera KM-1815 - Selecting the Original Placement for Scanning

Scanning Functions
2-13
Selecting the Original Placement for Scanning
Perform the following procedure to select the placement that the original is scanned.
Using the Platen
Using the Document Processor
1
Press the E-Mail key. The scanner basic screen is displayed.
2
Press the left select key.
3
Press the S key or the T key to select the original
placement and press the Enter key. The message
display shows Completed and returns to the scanner
basic screen.
Top Edge to Rear Top Edge to Left
Rear
Left
Top Edge to Rear Top Edge to Left
Rear
Left
:h_pttr@owl-net.net
Ready to send.
Dest.
SubjectPlacemnt
Left Off
:1
Orig. Placement:
Cancel
*
Top Edge to Rear
Top Edge to Left