Scanning Functions
2-14
Continuous Scanning
Use Continuous Scan to scan originals into memory in individual sections which may require
different settings. The machine then groups the sections together to form a single job.
1
Press the E-Mail key. The scanner basic screen is displayed.
2
Press the Function key.
3
Press the S key or the T key to select Continuous
Scan and press the Enter key. The Continuous
Scan screen is displayed.
4
Press the S key or the T key to select On and press
the Enter key. The message display shows
Completed and returns to the Function screen is
displayed.
5
Press the right select key. The message display returns to the scanner basic screen.
Using Continuous Scanning
1
Set the original.
2
Press the E-Mail key. The scanner basic screen is displayed.
3
Enter the e-mail address of the intended recipient from the one-touch key or the Destination key.
4
Program the settings as required to use additional functions which are explained on pages 2-7 to
2-12.
*
Function:
Exit
Orig. Placement
Continuous Scan
Zoom
*
Continuous Scan:
*
Cancel
Off
On
To Next Page
Loading...
