Kyocera KM-1815 - Selecting the Image File Format

Scanning Functions
2-16
Selecting the Image File Format
Use the following procedure to select the File Format for the saved imaged. The image file formats
available will differ depending upon the Scan Color setting. The following indicates the file formats
that are selectable under each setting.
Note When JPEG is selected, the Original Placement setting will become invalid. Refer to page 2-13.
1
Press the E-Mail key. The scanner basic screen is displayed.
2
Press the Function key.
3
Press the S key or the T key to select File Format
and press the Enter key. The File Format screen is
displayed.
4
Press the S key or the T key to select the desired file format and press the Enter key. The Image
Quality screen is displayed.
In case of the monochrome mode, PDF and TIFF are
available for file format.
Note If Full Color or Grayscale has been selected under Selecting Color Scan Mode on page 2-6,
the Image Quality screen is displayed.
5
Press the S key or the T key to select the desired
image quality level and press the Enter key. The
message display returns to the Function screen is
displayed.
Note The higher the image quality is, the larger the resulting file size will be.
Color Scan Mode Selectable File Formats Compression Level
Full Color PDF, JPEG 5
Grayscale PDF, JPEG 5
Monochrome PDF, TIFF None
*
Function:
Orig. Placement
Continuous Scan
File Format
Exit
*
File Format:
JPEG
PDF*
Cancel
*
Image Quality:
2
1 Low(High Comp)
*
Cancel
3 Normal