Scanning Functions
2-18
Entering the Name of Scan Job
The scanning job is named depending the time stamp or serial number. Settings for name will be
applied to all scan jobs. The default file name is doc.
1
Press the E-Mail key. The scanner basic screen is displayed.
2
Press the Function key.
3
Press the S key or the T key to select File Name
Entry and press the Enter key. The File Name
Entry screen is displayed.
4
Enter the desired file name.
Notes • The factory default setting for the file name is doc. Use COMMAND CENTER if you want to
change the default file name.
• The file name can be between one and 30 characters long. Refer to Chapter 3 in Basic
Operation Guide, Character Entry.
5
Once the file name has been entered, press the Enter key. The Additional Info screen is
displayed.
6
Press the S key or the T key to select the information
that will be added to the file name and press the Enter
key. The message display shows Completed and
returns to the Function screen is displayed.
7
Press the right select key. The message display returns to the scanner basic screen.
*
Function:
Continuous Scan
File Format
File Name Entry
Exit
File Name Entry:
Text
ABC
Cancel
doc
*
Additional Info.:
Cancel
Date and Time
Job No.
None
*
To Next Page
Loading...
