Kyocera KM-1815 - Reporting the End of Scanning

Scanning Functions
2-21
Reporting the End of Scanning
This function notifies you by e-mail when scanning has been finished. Perform the following
procedure to have a report sent to selected e-mail address which notifies you when scanned data
has been attached to and sent by e-mail.
1
Press the E-Mail key. The scanner basic screen is displayed.
2
Press the Function key.
3
Press the S key or the T key to select Job End
Report and press the Enter key. The Job End
Report screen is displayed.
4
Press the S key or the T key to select On and press
the Enter key. The Address Entry screen is
displayed.
5
Enter the e-mail address to which you want the report
to be sent (126 characters maximum).
6
Press the Enter key. The message display shows Completed and returns to the Function
screen.
*
Function:
Job End Report
File Name Entry
Subject Entry
Exit
*
Job End Report:
On
Off
Cancel
*
Address Entry:
Text
ABC
Cancel