Printer Settings
3-4
Network Settings
Network settings must be accomplished in order to enable network printing as well as to send
e-mail. This section explains the settings required in order to use the network functions of this
machine.
Notes • Be sure to get the approval of your network administrator and be prepared with the appropriate
information before you attempt to set the IP address.
• Always restart this machine after you have completed these network settings in order to
properly register the content of those settings in the machine. Refer to Restarting the
Machine on page 5-15.
Network settings are accomplished in accordance with the following flow.
AppleTalk Setting
Turn this setting On when this machine is connected to an Apple Macintosh computer.
1
Press the System Menu/Counter key. The System Menu/Count screen is displayed.
2
Press the S key or the T key to select System
Setting and press the Enter key. The System
Setting screen is displayed.
3
Press the S key or the T key to select Network
Setting and press the Enter key. The Network
Setting screen is displayed.
Start
È
AppleTalk (On/Off)
È
TCP/IP (On/Off)
È DHCP Off
DHCP (On/Off) IP Address Entry
È
Subnet Mask Address Entry
DHCP On È
Default Gateway Address Entry
È
Restart (Refer to Restarting the Machine on page 5-15.)
È
End
*
Sys. Menu/Count.:
Counter
System Setting
Report
Exit
*
System Setting:
Back
Network Setting
Parallel Setting
Exit
To Next Page
Loading...
